Field Assembly Sc Apc Drop Cable Fiber Optic Fast Connector
SC fast connector allow you to terminate a fiber in short time. The fast connect is a pre-polished connector which uses mechanical clamping and aligning of a cleaved fiber end which is inserted into the connector body. The fast connect is available in both singlemode andmultimode (OM1 and OM3 10Gig)and a variety of connector types and can be terminated onto 250um and 900um coated fibre as well as 2x3 mm and 2x1.6 mm jacketed cord.
Fast Connector Features
1. Field-installable
2. Fast and easy to terminate
3. Excellent insertion and RL performance
4. Reusable
5. No termination enclosure required.
6. Handles and performs like a factory terminated connector
7. Twin end-face of pre embedded fiber is polished in the factory
8. Fiber optics is aligned in V-groove through the ceramic frrule
Application
1. Direct termination of fibre
2. FTTx networks(FTTH. FTTD)
3. Enterprise/Access networks
4. LAN/WAN
5. Permanent/Temporary replacement/repairs
6. Pre-installation cable drum testing
Fast Connector Parameters
| Item | Parameter |
| Cable Scope | 2x3mm ,0.9mm |
| Connector Type | SC/APC |
| Fiber Diameter | 125μm (G652D, G657A1, G657A2) |
| Coating Diameter | 250μm |
| Mode | SM |
| Operation Time | about 15s(exclude fiber presetting) |
| Insertion Loss | ≤ 0.3dB(UPC) ; ≤ 0.3dB(APC) |
| Return Loss | ≥50dB for UPC, ≥55dB for APC |
| Success Rate | >98% |
| Reusable Times | >10 times |
| Tighten Strength of Coating | >10 N |
| Tensile Strength | >5 N |
| Temperature | -40 ~ +85 C |
| On-line Tensile Strength Test (20 N) | IL ≤ 0.5dB |
| Mechanical Durability(500 times) | IL ≤ 0.5dB |
| Drop Test (4m concrete floor, once each direction, three times total) | IL ≤ 0.5dB |
Product Tags:
|
|
SC APC Drop Cable 0.9mm Single Mode Fiber Sc Connector Images
|
